REPLICATING COMPOUND MICROSET 101FF
As low as €61.59
Stock : In stock
Only %1 left
Microset 101 FF
Microset 101 FF Overview
The Microset 101 FF is a high-resolution silicone polymer engineered for replicating metal surfaces, including rough textures, cavities, tubes, and threaded holes. Its fluid nature minimizes air entrapment and supports detailed inspection processes under various conditions.
Microset 101 FF Key Features
- Resolution: 0.1 μm
- Cured hardness: 28-30 Shore A
- Shrinkage: Less than 0.1%
- Colors: Black/Grey
- Temperature range: -10°C to +180°C
- Available in three packaging sizes: 50 ml, 265 ml, 495 ml
- 24-month shelf life
- Working time (25°C): 4 minutes.
- Full curing (25°C): 30 minutes.
| Technical Data Sheet |
|---|
| Cure Time 25°C (min) | 30 |
|---|---|
| Cured hardness | 28-30 Shore A |
| Resolution (μm) | 0.1 |
| Specific Gravity (g/cm³) | 1.1 |
| Maximum temperature (°C) | 180 |
| Minimum temperature (°C) | -10 |
| Viscosity | Fluid |
| Working Life 25°C (min) | 4 |
| Linear Expansion Coefficient (µstrain/°C) | 280 |
| Shrinkage (%) | 0.1 |